Hey buddies! This venture was a lot enjoyable! I’m serving to my children’ college do some renovating since they’re rising. The brand new director will likely be getting a brand new workplace right here in a number of weeks, and she or he requested me to assist her shanty it up a bit ?. Sure, please! To assist get monetary savings, I made a decision to repurpose a few of her previous items to make new items for the brand new area. I LOVE how this one turned out. One of the best half, I used to be capable of finding you guys related legs for $25 a bit on Amazon! You will discover these HERE! Earlier than I get to the plans, take a look at the how-to video by clicking the video participant under!
Didn’t that prove so cute?? I believe she is going to adore it within the new area. I will likely be sharing the entire area as we get extra work executed on it!
Now, let’s get began on the construct. You may obtain and print the FREE PLANS by clicking HERE!
Step one is constructing your desk high. Rip the planks and breadboards to five” every utilizing your desk noticed. These are 2×6 boards.
Subsequent, use your Kreg Jig so as to add 1.5” pocket holes down one lengthy facet of 5 of the plank boards and add 1.5” pocket holes one every brief finish of all 6 boards. I used my new Kreg Jig 720 PRO. LOVE THIS JIG. It’s my favourite one so far! You may see it HERE on Amazon!
Now connect your planks utilizing 2.5″ pocket gap screws via the pocket holes one the 5 boards. Be certain every board is flush on every finish and likewise flush on the edges. I used my Kreg Face Clamps to assist me on this half! They’re so helpful for this! You may see those I used HERE on Amazon.
After you have all of the planks connected you’re prepared on your breadboards. I like to carry the breadboard piece as much as my planks to get an actual measurement for this half.
Connect the breadboards via the pocket holes on the ends of every plank board utilizing 2.5″ pocket gap screws. You can even use your Kreg Face Clamp for this half too!
Now it’s time to start out constructing the apron. I like to position the legs on the desktop at this level and mark with a pencil the place every will line up.
Then, you may simply measure for every apron piece. The aprons are constituted of 1×4 boards. Minimize every board to dimension and add 3/4” pocket holes on the board in line with the place I drew them within the plans.
As soon as your whole pocket holes are made, connect every apron piece to the desk high utilizing wooden glue and 1.25” pocket gap screws.
As soon as your apron is completed, you might be prepared to chop and fasten the drawer assist boards. I used scrap 3/4″ plywood for mine, however within the plans I name for 1×4 as a result of you’ll have sufficient leftover from the apron items. Add 3/4″ pocket holes on these boards utilizing your Kreg Jig and fasten them to the desktop and to the entrance apron items utilizing 1.25″ pocket gap screws.
Now it’s time to construct our drawer! This half is tremendous straightforward. I constructed the entire thing from one 24″x24″ 1/2″ thick plywood panel to maintain the price down. I used my desk noticed to chop the plywood to sides. Construct the drawer field first by attaching the corners with wooden glue and 1.25″ brad nails.
Subsequent, connect the bottom of the drawer utilizing wooden glue and 1.25″ brad nails as nicely.
At this level, you may cease and fasten your drawer slides. Remember to watch the video to see how I put in mine. It’s straightforward!
Time for legs… YEAH! Keep in mind, you will discover very related legs to mine that work completely with these plans HERE ON AMAZON! And, they’re solely $25 a leg!
I connected my legs utilizing wooden glue and a pair of″ pocket gap screws via the apron pocket holes and into every leg.
Lastly I minimize and connected the drawer face. I prefer to nail it in place a pair occasions, after which open the drawer and reinforce it with screws via the within of the drawer and into the drawer face.
Now you might be prepared for paint and stain! I used Sherwin-Williams Pure White for the bottom and legs of the desk. I blended Varathane stain to get the desk high end. I mixed two stains to attain this colour…
I really like how she turned out! Right here it’s in my store, however I can’t wait to indicate you it arrange within the new workplace after we get it in there.
MORE FROM SHANTY-2-CHIC
