How to keep your smart home running during a long power outage

A long grid outage in Australia can disable more than lighting. Depending on the battery inside a device and the way its hub is configured, a smart lock, camera, thermostat and routine scene may all fail differently. The useful question is not whether a product is “smart”, but which functions must continue when the electricity and fixed-line connection are unavailable.

Start with life safety, communications, medication, food preservation and essential security. Then add convenience loads according to the backup system’s capacity. This order prevents a large television or heater from consuming the same reserve needed for an NBN modem, mobile phone or medical device, while keeping the household comfortable for as long as practical.

Household need Practical backup What it can power Main limitation
Internet and calls Compact UPS or power station NBN modem, router and one access point Fixed-line faults still require mobile data
Essential electronics Small UPS or battery bank Phone, alarm hub and network equipment Capacity may support only a few hours
Refrigeration Home battery or suitable generator Fridge-freezer on a selected circuit High energy demand, heat and refuelling
Medical equipment Supplier-approved UPS or battery system Only the specified device and alarms Runtime and changeover arrangements need verification

Know which systems truly need mains power

Treat the home as several overlapping systems, not a single smart appliance. A voice assistant may retain only clock and alarm functions, a battery-backed lock may continue opening, and a camera may record to its card while losing remote access. Write down the mains-powered devices, their backup times, any physical override and the household routines they support. Include overlooked loads such as the NBN modem, Wi-Fi access point, garage-door opener and electric gate.

Australian outage information is fragmented because electricity networks are state based. Ausgrid serves much of Sydney and NSW, Essential Energy covers large parts of regional NSW, Powercor operates across Victoria, and SA Power Networks serves South Australia. Their apps, defect notices and restoration estimates are separate, so save the relevant network’s details and keep a battery-powered radio nearby. For broader context on changing consumer technology, WeWEAT’s ongoing technology coverage is a useful companion to local planning.

Match backup power to the load

A compact uninterruptible power supply or portable power station is usually the easiest way to protect low-draw electronics. Calculate the combined watts of the NBN equipment, router and essential access point, then allow for conversion losses and battery ageing. Australian mains is 230–240 volts, and imported chargers may use different plugs or voltage ranges, so check the label and avoid cheap voltage-conversion boxes. A UPS also provides controlled shutdowns for a NAS or small server, preventing data loss rather than running a refrigerator.

For larger loads, compare a home battery with a portable generator. A properly installed home battery can run selected backup circuits silently, while a generator can support a fridge-freezer during a heatwave but needs fuel, ventilation and a safe changeover. Never operate a petrol generator in a garage, shed, house or near open doors and windows, and use a working carbon-monoxide alarm. An electrician should install any changeover switch or interlock; plugging random leads into a normal outlet risks backfeeding the grid.

Keep communications and local control alive

A fixed-line NBN connection may remain active during an electricity cut, but its modem, Wi-Fi router and phone still need power. Conversely, a local fibre or copper fault can continue even when the power returns. A charged 4G or 5G phone with hotspot data is therefore a practical secondary path for alarms, messages and remote camera access. Check the mobile plan’s data allowance and whether the hotspot can carry the required number of devices, because tethering can consume data quickly during an extended event.

Give the network equipment a dedicated UPS, then decide which services should fail first. Streaming television and video calls are expendable; remote access to locks, CCTV, medical alerts and the backup power monitor are not. Local automations can keep working without the cloud if the hub and devices share a LAN, while cloud integrations may stop after a provider outage. A well-planned smart home setup records those dependencies and provides manual controls for doors, blinds and heating.

Protect food medication security and comfort

Cooling and food safety become urgent when an outage stretches through an Australian summer. Keep the refrigerator and freezer closed, use a refrigerator thermometer, and prioritise a shaded room, water and fans over energy-hungry appliances. If a generator powers the fridge, run it through a correctly sized, surge-capable unit and only use equipment approved for that purpose. Do not place a generator close to the house merely to reach a fridge lead.

Any mains-powered medical equipment needs a plan agreed with its supplier, clinician or pharmacist; do not assume an ordinary UPS is suitable or that its stated runtime is guaranteed. NSW Safety First guidance, state emergency services and the equipment manual should sit with the outage checklist. Keep a torch, footwear, drinking water and medication accessible, and keep physical keys ready because electronic entry may fail with a dead lock battery, dead hub or lost internet connection.

Make the plan ready before an outage

Prepare the home before an event rather than during darkness. Label the UPS, power station, changeover switch and battery-backed devices; keep their manuals and spare fuses together; and note how to shut down a home battery safely. Put the router, one light, a phone charger and any essential medical device in a small “first power up” group. Test every battery every few months, replace ageing cells, and keep generator fuel within the manufacturer’s storage guidance.

Rehearse the response with a timed outage and a written sequence: confirm the outage, check the battery, enable backup circuits, connect communications, preserve food and medical needs, then reassess. Record each device’s draw and the expected combined runtime rather than relying on a wattage label alone. Write a one-page outage checklist now and tape it beside the router, where every adult can reach it without unlocking a smart device.